Instruction manual

Encore Presentation System • User’s Guide 129
4. Controller Orientation
Controller Sections
mêçÖê~ã=mêÉëÉí=pÉÅíáçå
The figures below illustrate the Program Preset Section on each Controller model. The
sections are essentially identical, except that the Controller SC has fewer presets, and the
Learn button is shared with the Preset Section.
Figure 4-23. Program Preset Section, Controller SC
Figure 4-24. Program Preset Section, Controller LC
Program Presets function in the same way as the buttons in the Preset Section, except
that they go
directly to Program when pressed — without the possibility of previewing the
look. The Controller LC has three program presets, the model SC has two.
Descriptions of each button are provided below:
Program Preset Buttons —
Presets to Program —
Program
Preset
1
Presets
to
Program
PROGRAM PRESETS
Program
Preset
1
Program
Preset
2
Program
Preset
3
Presets
to
Program
PROGRAM
PRESETS
Program
Preset
1
Note
The functionality of Program Preset buttons 1, 2 and 3 is
currently not implemented.
Presets
to
Program
Note
The Presets to Program button is currently not implemented.