Instruction manual

108 Encore Presentation System • User’s Guide
4. Controller Orientation
Controller Sections
Presets — press to display the Preset Recall Options Menu, which enables you to recall
all (or part) of a stored preset. Each preset register is divided into three portions
(
Background, DSK, and Border), which you can individually enable or disable for recall.
Note that the selected recall configuration (as set on the menu) is global. It affects all recall
functions from that point forward, until changed.
Effects — press to display the Effects Menu, which allows you to modify PIP and Key
transition effects, including the ability to define keyframes, paths and effect properties. In
Chapter 5, refer to the “
Effects Menu” section on page 190 for details.
Seqs —
User Keys — (Controller LC only) press to display the User Keys Menu, which enables
you to program, manage, modify, store and recall up to 100 user-defined operations. In
Chapter 5, refer to the “
User Key Copy Setup Menu” section on page 192 for details.
Machine Control — (Controller LC only)
Status — press to display the Status Menu, which provides a summary of connected
system hardware components, such as Video Processors, ScreenPRO-II units, ImagePRO
units, PresentationPRO-II units and Routers. In Chapter 5, refer to the “
Status Menu”
section on page 193 for complete details.
Cancel —
Presets
Effects
Seqs
Note
The Sequences Menu is currently not implemented.
User
Keys
Machine
Control
Note
The Machine Control Menu is currently not implemented.
Status
Cancel
Note
The Cancel function is currently not implemented.