Instruction manual

100 Encore Presentation System • User’s Guide
4. Controller Orientation
Controller LC Front Panel
13) Transition Section
The Transition Section includes the T-Bar for manually mixing sources on and
off Program, plus dedicated buttons for cuts, auto-transitions and sequencing.
Refer to the “
Transition Section” heading on page 125 for details.
14) Group Control Section
The Group Control Section enables you to take one or more destinations and
assign them to a single button, simplifying the task of selecting destinations. On
the Controller LC, eight
Group buttons are available. Refer to the “Group
Control Section” heading on page 127 for details.
15) Program Preset Section
The buttons in the Program Preset Section allow you to take a preset directly to
Program, without first viewing it on Preview. Refer to the “
Program Preset
Section” heading on page 129 for details.
16) Layer/Aux Control Section
The buttons in the Layer/Aux Control Section provide additional “on air” layer
control. Refer to the “
Layer/Aux Control Section” heading on page 130 for
details.
17) Transition Functions Section
The buttons in the Transition Functions Section enable you to set a variety of
parameters for the current transition and mode. Refer to the “
Transition
Functions Section” heading on page 132 for details.
18) User Key Section
The buttons in the User Key Section are programmable, and can be assigned to
map a set of stored parameters to the active PIP or Key. On the Controller LC
only, 100 user keys are available — 10 pages of 10 keys each. Refer to the “
User
Key Section” heading on page 134 for details.
Please continue with the “
Use of Color” section on page 103.