Owner's manual

RGB 168

xixi

xi • Installation and Operation

Installation and Operation, cont’d

2-12

HIGH VOLTAGE

CAUTION

Adapter Plate

Tighten nuts

securely

UNSWITCHED

600 WATTS MAX.

Cable Routing

RGB 168 xi

INPUTS

AUDIO

ANALOG

MIN/MAX

UNIVERSAL INTERFACE W /ADSP

ID PIN 14

ID PIN 11

BUFFERED LOCAL

MONITOR OUTPUT

Routing adapter output cables and

attaching adapter plates

6. Insert the adapter plate screws through the holes in the

interface front panel, as shown above. Attach the

adapter plates to the enclosure with the provided

captive washers and #4-40 nuts.

7. Gently pull excess cable(s) out the rear panel cable

clamp openings or, if a rear panel output adapter plate is

being used, connect the cable(s) to the plate

connector(s). Do not strain or damage the cable-

adapter connections.

8. Fasten the cables in place by tightening the screws on

the cable clamps provided on the rear panel openings.