Operating instructions

A-3CrossPoint Plus Matrix Switchers • Specifications
Audio— audio models only
Routing.......................................... 84 series .................... 8 x 4 stereo matrix
88 series .................... 8 x 8 stereo matrix
124 series ................... 12 x 4 stereo matrix
128 series ................... 12 x 8 stereo matrix
168 series ................... 16 x 8 stereo matrix
1616 series ................. 16 x 16 stereo matrix
Gain ............................................... Unbalanced 0dB, balanced +6dB
Frequency response..................... ±0.05dB @ 20 Hz to 20 kHz
THD + Noise ................................ 0.03% @ 1 kHz at rated maximum output drive
S/N ................................................ >90dB, output 21dBu, balanced
Adjacent input crosstalk............. >-80dB @ 1 kHz
Stereo channel separation .......... >-80dB @ 1 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz
Audio input — audio models only
Number/signal type ................... 8, 12, or 16 stereo, balanced/unbalanced
Connectors.................................... 8, 12, or 16 3.5 mm captive screw connectors, 5 pole
Impedance .................................... >20 kohm, balanced, DC coupled
>10 kohm, unbalanced, DC coupled
Maximum input level ................. +19.5dBu, (balanced or unbalanced) @ stated %THD+N
Input gain adjustment................. -15dB to +9dB, adjustable per input by RS-232 or front panel
Audio output — audio models only
Number/signal type ................... 4, 8, or 16 stereo, balanced/unbalanced
Connectors .................................... 4, 8, or 16 3.5 mm captive screw connectors, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error...................................... ±0.1dB channel to channel
Maximum level (Hi-Z) ................ > +21dBu, balanced or unbalanced at stated %THD+N
Maximum level (600 ohm) ......... > +15dBm, balanced or unbalanced at stated %THD+N
0dBu = 0.775 volts (RMS).
Control/remote — switcher
Serial control port ........................ 1 RS-232 or RS-422, 9-pin female D connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations.... 2 = TX, 3 = RX, 5 = GND
Program control ........................... Extron’s control program for Windows
Extron’s Simple Instruction Set – SIS
General
Power............................................. 100VAC to 240VAC, 50/60 Hz, internal, auto-switchable
84/88/124/128......... 30 watts
168/1616.................... 36 watts
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +104°F (0° to +40°C) / 10% to 90%, non-condensing
Rack mount................................... Yes, with included parts
84/88/124/128 series.............3U high
168/1616 series........................ 6U high
Enclosure type.............................. Metal