Installation guide

VoiceLift System with PVS 405D Installation Guide • Introduction
8
PoleVault Switcher Location
The PoleVault switcher can be mounted anywhere in the room, because the volume
controls are on the microphone. However, placing the switcher near the ceiling makes
cabling and upgrading to a full PoleVault system easier.
WARNING: Structural ceiling failure could cause serious injury or death.
Check the structural ceiling to ensure that it can handle a load four times the
weight of the nal setup.
PVS 405D
Digital
PoleVault
Switcher
PMK 550
Projector Mount Ki
t
PVS 405SA IP
POLEVAU
LT SWITCHER
AUDIO LEVEL ADJUST
INPUTS
1
2
SELECT
CONFIG
R
PEAK
NORMAL
SIGNAL
INPUT
3
4
5
AUX
AUDIO
PEAK
NORMAL
SIGNAL
VOICELIFT
PAGING
SENSOR
SENSITIVITY
Figure 8. Mounting a PoleVault Switcher to a Projector Pole
Possible switcher mounting locations include:
• On a desk • Mounted to a wall
• Under a desk • Mounted to a ceiling pole
• In a cabinet • Above a drop ceiling (The PVS is plenum rated.)