User Guide Owner manual

4-5
PVS 305SA • Serial Communication
PRELIMINARY PRELIMINARY
X2# = Video type (inputs 3 and 4 only)
1 = Composite video (default)
2 = RGB
X2$ = Video signal status
0 = Video signal not detected
1 = Video signal present
X2% = 0 to 15, mic talk-over threshold level range, default 6
X2^ = 0 to 30, program ducking level in talk over mode, default = 15
X2& = Lineout status
1 = variable
2 = fixed
3 = independent separate mono Left channel fixed and mono Right channel variable
X2( = 0-8, paging delay in 1 second steps, (default = 0, disabled)
0 = 0 second (disabled), 1 = 1.0 seconds, 2 = 2.0 seconds...8 = 8.0 seconds
X3^ = Pass through mode
0 = not in pass-through mode (default)
1 = in pass-through mode
Factory defaults
Input audio gain X& = 0
Power amp gain X1) = 0
Volume X^ = 50
Bass level X$ = 7
Treble level X$ = 7
Power mode X1! = 1
Audio output X@ = 1
Loudness X# = 0
VoiceLift input gain X& = 0
Video type X2# = 1
Audio mute X# = 0
VoiceLift receiver aux input X# = 0
Front panel executive mode X# = 0
RGB delay X2@ = 0
Mic talk-over threshold X2% = 6
Program audio ducking X2^ = 15
Lineout mode X2& = 1
High pass filter X# = 0
Paging sensor delay X2( = 0
Pass-through mode X3^ = 0