Specifications

www.extron.com
© 2010 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.863.1794 / +800.633.9876
+1.919.863.1797 FAX
Up to 45º
N E W P R O D U C T S
32
ArcHitecturAl connectiVity
Model Version Description Part Number
AVTrac 482C Carpet Inlay, w/AC US, Prewired Conduit . . . . . . 42-155-24A
AVTrac 482R Rubber Strip, w/AC US, Prewired Conduit
. . . . . 42-156-24A
Model Version Description Part Number
AVTrac INST CPT Cable Pass-through Kit for AVTrac . . . . . . . . . . . . . 70-714-02
AVTrac
®
Low Profile Floor-Mount Raceway System for A/V Connectivity
AVTrac
®
Cable Pass-Through Kit
Table Leg Kit for AVTrac
The Extron AVTrac
®
is a low profile, floor-mounted
raceway system with a modular AAP - Architectural
Adapter Plate enclosure. Two 4-foot (1.2 m) tracks
combine to create the 8-foot (2.4 m) raceway designed
for use in any environment in which A/V devices
cannot be positioned near a wall or other area where
power, data, and A/V connections are traditionally
located. AVTrac is a discreet, cost-effective alternative
to floor coring for poke-through devices, trenching
for floor boxes, and raised access flooring. AVTrac is
ideal for use in classrooms, training centers and other
reconfigurable spaces, and corporate boardrooms, as
well as legacy installations and architecturally-sensitive
environments.
FEATURES
•
Low profile cable raceway system
• Cost-effective alternative to floor coring and
trenching
• ADA compliant 8-foot (2.4 m) total length cable
raceway and side ramps
• Modular enclosure with 2 double-space and
2 triple-space AAP openings
• Easy access cover panel
• AC power modules available for US, Europe, and
other major world markets
The AVTrac
®
Cable Pass-Through Kit mounts at the
end of an AVTrac Extension Kit and is designed for
applications where cables need to be passed from
the wall to a hollow table leg, desk, or a fixedlectern
location. The Cable Pass-Through Kit can also be
used at either end of an AVTrac Extension Kit to allow
the seamless transition of cables from one table leg
to the other. The Cable Pass-Through Kit minimizes
the number of termination points and corresponding
signal loss by allowing continuous cable runs between
primary connection points within the system.
FEATURES
•
Provides cable transition into or between hollow
table legs
• Designed for use with the AVTrac Extension Kit
• All necessary materials are included for installation
mounting HArdwAre
Model Version Description Part Number
PCM AM Angle mount kit for PCM 340 . . . . . . . . . . . . . . . . . 70-680-03
PCM AM
Angled Mount Kit
The PCM AM Angle Mount Kit is designed for use with
the current versions of the PCM 240 or the PCM 340
Ceiling Mounts. It provides up to 45 degrees of
adjustment for projector mounting poles and allows
the projector to hang level in angled suspended ceiling
applications. Available in white.
FEATURES
•
Designed for use with Extron PCM Projector
Ceiling Mounts
• Provides up to 45 degrees of adjustment
• Enables projector to hang level from angled
suspended ceilings
• Kit contains one swivel bracket and one angle
bracket
• Available in white