Specifications

11822 / Newcomb Academy 27 4116.51 - 6 AUDIOVISUAL POLE VAULT SYSTEMS
FOR
6-18-13
Wall Plates. These wall plates shall enable the system to display video, graphic data and
audio from Laptop computers, DVD and VCRs, document cameras, camcorders, etc.
b. These active interface transmitters shall be placed in convenient locations throughout
the classroom to facilitate easy connection of sources, per the drawings.
c. Provide one (1) PVT RGB D IP Plus, VGA Video Twisted Pair Transmitter with Dual
Network. Wall Plate shall be used to connect RGB devices to the system and
transmit the video and audio data to the PVS switcher as well as provide two network
connections to the classroom.
1) Active Twisted Pair Transmitter shall transmit RGB video over UTP cable to the
PVS Switcher and support video input resolutions of VGA – UXGA RGBHV,
RGBS, RBsB and RsGsBs via one (1) female 15-pin HD connector.
2) Wall plate shall fit in a standard, dual-gang electrical box and feature Decora®
type faceplates.
3) Stereo audio shall be input via one (1) 3.5 mm mini stereo jack.
4) Data connections shall be two (2) RJ45 jacks.
5) Built-in distribution amplifier output for local monitor shall be provide on one (1)
female 15-pin HD connector.
6) The output of the interface shall be via two (2) female RJ-45 connectors.
7) Connection to the PVS Switcher shall be via two (4) UL plenum rated UTP
cables.
d. Provide one (1) PVT RGB D, VGA Video Twisted Pair Transmitter. Wall Plate shall
be used to connect RGB devices to the system and transmit the video and audio data
to the PVS switcher.
1) The Active Twisted Pair Transmitter shall transmit RGB video over UTP cable to
the PVS Switcher and support video input resolutions of VGA - UXGA RGBHV,
RGBS, RBsB and RsGsBs via one (1) female 15-pin HD connector.
2) Wall plate shall fit in a standard, single-gang electrical box and feature Decora®
type faceplates.
3) Stereo audio shall be input via one (1) 3.5 mm mini stereo jack.
4) The output of the interface shall be via two (2) female RJ-45 connectors.
5) Connection to the PVS Switcher shall be via two (2) UL plenum rated UTP
cables.
e. Provide one (1) PVT CV D, Composite Video Twisted Pair Transmitter. Wall Plates
shall be used to connect composite video devices to the system and transmit the
video and audio data to the PVS switcher.
1) The Active Twisted Pair Transmitter shall transmit composite video over UTP
cable to the PVS Switcher and support video input via a RCA female connector.
2) Wall plate shall fit in a standard, single-gang electrical box and feature Decora®
type faceplates.
3) Stereo audio shall be input via two (2) RCA female connectors.
4) The output of the interface shall be via one (1) female RJ-45 connector.
5) Connection to the PVS Switcher shall be via one (1) UL plenum rated UTP cable.
B. Energy Efficiency
1. The audio video system shall incorporate energy conservation features to reduce
consumption and lower operating costs.
2. The system shall incorporate an Auto Power Save Mode with fast power-up that
automatically deactivates the audio amplifier after 30 minutes of inactivity. It quickly returns
to full power status in less than one second upon signal detection
3. The system shall incorporate a Standby Mode that allows the amplifier and twisted pair
transmitters to be deactivated when not in use.
4. The system shall incorporate monitoring and scheduling of system peripherals, such as
sources and displays, in order to deactivate them when not in use or alert to unauthorized
use.
C. Extron Priority Pager Sensor Kit