Specifications

AUDIOVISUAL SYSTEMS 27000 pg (5)
(1) Active Twisted Pair Transmitter shall transmit RGB video over UTP cable to the PVS Switcher and
support video input resolutions of VGA - UXGA RGBHV, RGBS, RBsB and RsGsBs via one (1)
female 15-pin HD connector.
(2) Wall plate shall fit in a standard, dual-gang electrical box and feature Decora
®
type faceplates .
(3) Stereo audio shall be input via one (1) 3.5 mm mini stereo jack
(4) Data connections shall be two (2) RJ45 jacks
(5) Built-in distribution amplifier output for local monitor shall be provide on one (1) female 15-pin HD
connector
(6) The output of the interface shall be via two (2) female RJ-45 connectors
(7) Connection to the PVS Switcher shall be via two (4) UL plenum rated UTP cables.
b. One (1) PVT RGB D, VGA Video Twisted Pair Transmitter - Wall Plate shall be used to connect RGB
devices to the system and transmit the video and audio data to the PVS switcher.
(1) The Active Twisted Pair Transmitter shall transmit RGB video over UTP cable to the PVS Switcher
and support video input resolutions of VGA - UXGA RGBHV, RGBS, RBsB and RsGsBs via one (1)
female 15-pin HD connector.
(2) Wall plate shall fit in a standard, single-gang electrical box and feature Decora
®
type faceplates .
(3) Stereo audio shall be input via one (1) 3.5 mm mini stereo jack.
(4) The output of the interface shall be via two (2) female RJ-45 connectors.
(5) Connection to the PVS Switcher shall be via two (2) UL plenum rated UTP cables.
c. One/Two (1/2) PVT CV D, Composite Video Twisted Pair Transmitter – Wall Plates shall be used to
connect composite video devices to the system and transmit the video and audio data to the PVS switcher.
(1) The Active Twisted Pair Transmitter shall transmit composite video over UTP cable to the PVS
Switcher and support video input via a RCA female connector.
(2) Wall plate shall fit in a standard, single-gang electrical box and feature Decora
®
type faceplates.
(3) Stereo audio shall be input via two (2) RCA female connectors.
(4) The output of the interface shall be via one (1) female RJ-45 connector.
(5) Connection to the PVS Switcher shall be via one (1) UL plenum rated UTP cable.
6. Data Connectivity
The audio video system shall incorporate features that expand access and connectivity to an existing data network
a. The PVS Switcher shall incorporate a four port network switch, allowing a single network drop to provide
connectivity for two computers and the MLC controller in each room.
b. The audio video system shall include a dual network pass through wallplate and cabling for easily
connecting room based computer devices to the network switch in the PVS Switcher
c. The audio video system shall include a IP Link enabled MediaLink controller, also connected to the network
switch in the PVS Switcher, allowing remote monitoring, scheduling and control of the system over a
network.