Specifications

9
POLEVAULT SWITCHER/AMPLIFIER
The heart of each PoleVault System is the PVS 305SAIP Switcher/Amplifier. With four video inputs, a switched audio input, and an integrated
50 watt rms stereo audio amplifier, this switcher meets the needs of most single projector AV environments.
The PVS 305SAIP Switcher offers two high resolution RGB computer-video signals with stereo audio and two configurable inputs with stereo
audio that support either RGB or composite video. The switched audio input supports audio from an HDMI video source or MP3 player.
The PVS 305SAIP features an integrated 50 watt rms stereo audio amplifier capable of driving up to four Extron speakers and filling the
room with full, rich sound. A line level output allows system audio to be used with podcasting or assistive listening systems.
Also included in the PVS 305SAIP is an integrated four port network switch. This allows up to three devices within the classroom to share
a single network drop.
Input Selection Buttons
Easy input selection with
corresponding LED illumination
VoiceLift Level Control
Provides independent level
adjustment for the VoiceLift
Microphone
Input Level Control
Provides level adjustment on
each input, eliminating volume
differences among sources
Priority Paging
Mutes audio when an
announcement from the public
address system is detected
Line Level Output
Configurable audio output for podcast
recording, assistive listening systems,
or larger amplifiers
Integrated Amplifier
For stereo or dual mono operation
providing 25 watts rms per channel
into 2, 4, or 8 ohms
Network Switch
Four port switch allows three
devices to share a single
network drop
Control Port
Compatible with MediaLink
controller for input switching and
volume control via RS-232 or
hardwired IR
Auxiliary Audio Input
Switched input for audio from
an HDMI/DVI video source
or MP3 player
VoiceLift Receiver
Input
Simplifies installation of
the VoiceLift Microphone
VGA and Video
Outputs
For sending computer-
video and composite
video signals to a
display device
Two Configurable Inputs
Support for either RGB or
composite video and stereo
audio signals from PoleVault AV
input wallplates
Two RGB Inputs
Accept up to two VGA and
stereo audio signals from
PoleVault AV input wallplates
Energy Efficiency
Auto Power Save and Power
Standby modes reduce power
consumption by as much as
60% when idle
FEATURES
• Available exclusively as part of a PoleVault System
• Receives VGA computer video, composite video, and stereo audio signals from PoleVault AV input wallplates
• Integrated 50 watt rms audio amplier for stereo or dual mono audio
• Receives audio and video signals, and provides power to AV input wallplates over CAT 5-type cable
• Integrated four port network switch allows three classroom devices to share a single network drop
• VoiceLift Receiver input simplies installation of the VoiceLift Microphone
• A switched auxiliary audio input provides support for audio from an HDMI/DVI video source or MP3 player
• Independent input sensitivity adjustments are provided for program audio and VoiceLift Microphone
• Congurable audio line output for podcast recording, assistive listening systems, or adding an additional amplier
• Paging sensor input mutes program audio when a public address system announcement is detected by the optional Priority
Page Sensor Kit (part# 70-619-01)
• Auto Power Save and Power Standby modes provide energy efciency to reduce operating costs
System Switcher