User Manual

PoleVault Systems Installation • Introduction — Inventory Overview

1-10

Introduction — Inventory Overview, cont’d

d. Installation tools

To aid the professional installer, this checklist gives the tools recommended to complete the installation.

Tools should include, but are not conﬁned to:

• Laser level, or two levels (large for screen installation, small for wall plates and projector mounts)

• Tape measure

• Stud nder

• Drill and drill bit set including a Unibit to cut through metal studs

• Extension drill bit (3/4" min. (1.9 cm), 4 to 8' length (122 to 244 cm), to drill through re-breaks)

• Socket set

• Pipe strap or wrapped pipe wrench

• Lineman’s pliers and wire strippers

• Standard screwdriver set and tweeker

• Cable cutters (to cut safety wire)

• Dry wall saw and hacksaw blade mounted on handle (for cutting ceiling tiles)

• Flashlight and safety goggles

• Razor knife

• 2" hole saw

• Painters tape (to mark up walls), pencil, and marker pen

• RJ-45 crimpers and RJ-45 connectors

• Voltage tester

• Fish tape, pull string, and electrical tape (for taping sh tape to pull string)

• Zip ties

• Vacuum cleaner

• Heat gun