Manual

Installation
Overview
This section outlines the basic steps for installing the PoleVault System. An outline and
checklist of the stages (Stages One through Five), listing the relevant steps within each
stage, is given on pages 16 and the rear cover. A fully detailed description of these steps is
given in the five corresponding sections.
Carefully check inventory of PoleVault System packages, input and output devices, any
optional accessories, and installation hardware before commencing.
NOTES:
• Additional installation hardware is needed for this installation, and should be
supplied by the installer. See Items Not Included on page 12 for a list of items that
you may need.
• Refer to local building standards and codes to verify that the installation will meet all
the regulatory requirements.
• Observe all local and national building and safety codes, UL requirements, and
ADA accessibility guidelines.
Similar outline lists of steps for installing WallVault (WMK 160 or USFM 100) and
PlenumVault (PVM 220) Digital Systems can be found on pages 73 through 76.
PoleVault Digital Systems • Installation Overview 15