User Guide

3-9PIP 422 and PIP 444 Picture-in-Picture Processors • Operation
Window Effect submenu
Use this submenu to select a transition effect for the PIP to use when enabling,
disabling, or swapping windows. You can choose from the following three options:
Cut — The window turns seamlessly on and off. No effect is applied to the
transition. This is the default setting.
Wipe — The window appears to unroll over the old screen, from left to right.
Dissolve — The window appears to dissolve on or off.
The wipe and dissolve effects are set to a fixed 0.5 second transition interval,
which cannot be changed.
Window Priority submenu
The Window Priority submenu allows you to set how the windows
will overlap one another. The submenu lists the inputs in order of
their priority, from left to right. The input that appears in the
leftmost position in the submenu will appear in front of all the other
windows. Rotate the Adjust knob to select an input to adjust.
Rotate the Adjust
knob to set the priority of the input.
Temperature submenu
This display only submenu shows the temperature of the PIP in degrees Fahrenheit
and Celsius.
The Temperature submenu is available only on newer models.
Genlock Configuration menu (PIP 444 only)
Figure 3-8 is a flowchart that shows an overview of the Genlock Configuration
menu, the submenus, and the available settings.
20 sec.
20 sec.
Next
Horizontal phase Subcarrier phase
• Align the output
horizontal phase with
the reference signal
horizontal phase.
• Align the output color
subcarrier phase with
the reference signal
color subcarrier phase.
Default
Cycle
Input
Config
Menu
Menu
Output
Config
Menu
Advanced
Config
Menu
Menu
Menu
Next
To exit menu
press NEXT
H Phase SC
000 000
NOTE The PIP returns to
the last active main
menu or submenu
when you press Menu.
Genlock
Config*
*PIP 444 only
Figure 3-8 — Genlock Configuration menu flowchart
The Genlock Configuration menu allows you to align the horizontal phase and
color subcarrier phase of the output signal with those of the genlock reference
(black burst) signal. Rotate the Adjust
knob to align the horizontal phase and
the Adjust
knob to align the subcarrier phase through a range from 0 to 255.
W
indow
a
ppears
in front
Windo
w
appea
rs
in bac
k
Win Priority
F
< 1 > 2 3 4 B