Specifications

11
MOUNTING HARDWARE
?
POLEVAULT SYSTEMS
PCM 240
Projector Drop Ceiling Mount
Included in PoleVault System
t
Projector drop ceiling mount for use with t
suspended ceilings
Provides time- and cost-effective integration of
t
projectors in small boardrooms and classrooms
Includes knockout openings for junction boxes
t
— RACO #8471 recommended — or for use as
cable pass-throughs
Includes 1.5" threaded pipe adapter for mounting
t
projector mount poles
Dimensions: 25.8" L x 8.00" W x 1.15" D
t
(65.4 cm L x 20.3 cm W x 2.9 cm D)
Available in white
t
UPB 25
Universal Projector Bracket
Included in PoleVault System
t
Universal projector mount compatible with nearly t
every projector up to 25 pounds
Independent adjustments of horizontal tilt or roll,
t
vertical angle or pitch, and rotation or yaw
Precise positioning adjustments are maintained
t
even if projector is removed
for service
Built-in security tabs to prevent theft
t
Projector mounting hardware included for t
attaching projectors to the UPB 25
Optional security hardware, part # 70-555-01
t
Available in black or whitet
PMK 450
Easy Installation Multi-Product Projector Mounting Kit
Included in PoleVault System
t
Securely mounts and conceals multiple products in t
varied configurations above the display device
Fully enclosed, four-sided enclosure with swing-down
t
access door and tamper-proof screws
Accommodates the PVS 204SA Plus, power supply,
t
and all Extron quarter rack products such as
VersaTools
®
and IP Link models
Low profile requires 2" (5.0 cm) of height between
t
projector and ceiling
Dimensions: 2.0" H x 12.3" W x 10.87" D
t
(5 cm H x 31.2 cm W x 27.6 cm D)
Available in black or white
t
Ventilation slotst
PMP Series
Projector Mount Poles
Attaches ceiling mount to the UPB 25 Universal
t
Projector Bracket
The PMP 6, 6" (15 cm), is included in PoleVault
t
System; the PMP 10, 10" (25 cm), PMP 12,
12" (30 cm), PMP 18, 18" (45 cm), or PMP 24,
24" (60 cm), may be substituted
Used with Extron UPB 25, PCM 240, and other
t
accessories to create individualized installations
1.6" W x 1.75" H (4 cm W x 4.4 cm H) cutout
t
provides convenient cable access
Available in black or white
t
Selecting A Projector For
Polevault Systems
PoleVault Systems work with virtually any
projector. However, in order to enable the
full benefits of system control and network
monitoring, it is important to select a projector
that includes the following features:
RS-232 Control Port with Bi-Directional
Communication - Many projectors provide
only IR control or unidirectional RS-232.
Bidirectional RS-232 allows a projector to
both receive commands and provide status
feedback to the control system. This capability
is important for transmitting information
about the projector to the GlobalViewer
Web application via the controller’s IP Link
technology.
Communication During Standby Mode -
Some projectors do not have the ability to
communicate with a control system while
in standby mode. In order to fully utilize
the security features in IP Link technology,
such as the detection of a projector that has
been disconnected, it is important to select
a projector that can communicate during
standby mode.
Rich Set of Monitoring Commands - The
more data available from the projector via
RS-232, the better. Examples of useful data
include: lamp hours, temperature, filter status,
current input selected, projector on/off, video
mute status, etc.
Brightness - A projector of at least 2000
ANSI lumens is recommended in order to
provide good visibility in brightly lit rooms.
For more information, contact the Extron
Education Support Team