User guide

SMX System MultiMatrix Switcher • SMX Control Software 71
• Virtualize... — Select this option to view and set up to 10 virtual planes. Select
a Virtual Plane check box then select the desired Physical Planes check
boxes. Select Take. New tabs for the virtual planes (planes 1 and 5 in the example
below) appear on the inputs page. This recreates configurations from current
boards and configurations onto virtual planes.
• Name Presets — Select this to assign or edit preset names.
Audio-input-Config
NOTE: This menu title is grayed-out until an audio plane is selected.
Upon selection of this menu, the Configure Audio Options window opens.
• Configure Audio Options — Sets the dB gain per audio input.
Click on the applicable Changes radio buttons to have the changes be either immediate
or verifiable.
• Immediate removes the Take button from the window and all changes are made
immediately.
• Verify (default setting) allows accepting the changes via a Take button.
In verify mode, click on the up or down arrow for the an input until you reach the desired
gain value (range is -18 to 24 dB, default 0 dB), then click Take. The dB value is shown
in black for current values, but turns red when changes are pending or green when the
pending change is returned to its original value. Click Take to confirm pending changes.
If you desire default values (0 dB), click Use Defaults.