User guide

SMX System MultiMatrix Switcher • SMX Control Software 65
• Assign Device Icons — Select this option to add specific device icons to the main
window input and output boxes. This opens a new window showing input and output
device icons. Drag and drop an icon onto the applicable input or output boxes.
NOTE: Alternatively, clicking on either input or output boxes opens the relevant icon
window. Drag and drop an icon onto the boxes.
• Edit Device Palette — Selecting this option opens the Editor window (see figure 34).
To edit an icon name, swap, or upload a new icon, select the icon number, click Edit
and follow the on-screen prompts. Any changes made are shown in the Device Palette
when next selected (see Customizing the SMX Window on page 75).
Click Close to exit the Device Palette Editor window.
Figure 34. Device Palette Editing Windows
• RGB Delay settings (VGA and RGBHV boards only)
— Select this option to change and set RGB Delay for
any selected outputs. The RGB Delay & Mute Adjust
window opens.
NOTE: To select all outputs, check the ALL box.
To change or set RGB delay:
1. Select an output (or All) and adjust the RGB Delay
slider to set the desired delay (in 0.5 second steps).
2. Click Take to accept the change, or click Cancel to ignore the change.
3. Click Close to exit the window.
NOTE: This menu also contains mute output settings (see Mute-Output settings
on page 66 for the procedure).