User guide

SMX System MultiMatrix Switcher • SMX Control Software 64
• Restore Matrix settings from... — Select this option to restore saved matrix settings
files (*.mtx) and overwrite the current settings.
NOTE: All current settings (ties, presets, virtual plane, and audio settings) unless
already saved, are replaced.
• Save This-Session’s settings — Select this option to save the specific session
settings (ties, presets, rooms, and audio settings) to file (*.ini), which can be used for
restoring those settings later.
NOTE: The last saved settings within the same *.ini file are overwritten.
• Restore the Last-Session’s settings — Select this option to restore the last session
settings from a saved file (*.ini).
NOTE: The current settings (ties, presets, rooms, and audio settings) are
overwritten by the restored settings.
• Select Printer — Selecting this opens a second drop-down list listing the available
printers connected to the PC.
• Print Tie Map — Select this option to print the tie map in the active window to the
default or currently selected printer.
• Exit — Select this option to close the SMX control program. Current settings are
maintained and loaded upon restart.
NOTE: Alternatively, click on the red X in the top right corner of
the main window to close the SMX Control Program.
Tools Menu
This drop-down list (see figure 33) includes the following items: Assign Device Icons,
Edit Device Palette, RGB Delay settings, Audio-Input Gain settings,
Audio-Output Volume settings, Mute-Output settings, HD-SDI Re-clocker
Rate settings
, EDID settings, HDCP Status, USB Settings/Status, View Input
Frequencies
, Update Firmware..., IP Options, HTML File Manager, Hardware
Status
, Physical Switchers config, Virtualize..., and Name Presets.
Figure 33. Tools Menu