User guide

SMX System MultiMatrix Switcher • SIS Configuration and Control 56
Command and Response Table for IP SIS Commands
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
IP Setup Commands
Set unit name
EX5$ CN} Ipn
•
X5$]
Reset unit name to factory
default
E
•
CN} Ipn
•
X5(]
Read unit name
ECN} X5$] or X5(]
Set time and date
EX5% CT} Ipt
•
X5%]
See
X5%
Symbol Definitions on
page 53 for more details.
Read time and date
ECT} X5%]
Set GMT offset
EX5@ CZ} IpzX5@]
NOTE: In the command, the divider between hours and minutes can be either a colon or a period. In the response,
the divider is a colon.
Example:
E8.0CZ} Ipz+08:00]
Read GMT offset
ECZ} X5@]
Set Daylight Saving Time
EX7% CX} IpxX7%]
Read Daylight Saving Time
ECX} X7%]
Set DHCP on
E1DH} Idh1]
Set DHCP off
E0DH} Idh0]
NOTE: Setting DHCP from on to off will reset the IP address to factory default (192.168.254.254).
View DHCP mode
EDH} X5#]
Set IP address
EX5^ CI} Ipi
•
X5^]
Read IP address
ECI} X5^]
Read hardware address
(MAC)
ECH} X5*]
Iph
•
X5*]
00-05-A6-xx-xx-xx = MAC
address
Verbose mode 2 and 3
Read # of open connections
ECC} X8(]
0 - 200 = number of open
connections
NOTES:
X5@ = GMT offset –12.0 through +14.0 hours and minutes removed from GMT
X5# = DHCP mode status 0 = off or disabled
1 = on or enabled
X5$ = Unit name Text string up to 24 characters (A-Z, 0-9, and "-").
Not case sensitive.
X5% = Time and date (set and read) MM/DD/YY•HH:MM:SS
X5^ = IP/Gateway address nnn.nnn.nnn.nnn, Factory default IP address: 192.168.254.254
X5* = Hardware (MAC address) nn.nn.nn.nn.nn.nn
X5( = Default Name Combination of model name and last 3 pairs of MAC address
(SMX-00-02-3D)
X7% = Daylight Saving Time 0 = Daylight Saving Time off or ignore
1 = Daylight Saving Time on (USA)
2 = Daylight SavingsTime on (Europe)
3 = Daylight Saving Time on (Brazil)
X8( = Number of open connections 0 - 200