User guide

SMX System MultiMatrix Switcher • SIS Configuration and Control 52
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Commands Specific to SMX USB Boards
Port Emulation for Outputs
Set port emulation for all
outputs
EEX3)*X(*USBC} X3) UsbcE0*X(]
Enable or disable port emulation
for all outputs.
Set port emulation for output
pairs
EEX3)*X#*X( USBC} X3)UsbcEX#*X(]
Enable or disable port emulation
for output
X#.
View port emulation status for
outputs
EEX3)*X# USBC} X(]
X3)
UsbcEX#*X(] Verbose mode 2 and 3
View port emulation status for
all outputs
EEX3)*USBC}
X(
1
X(
2
X(
3
...X(
n
]
X3)UsbcE*X(
1
X(
2
... X(
n
] Verbose mode 2 and 3
Signal Status
View input signal status
EIX3)*X! USBC} X(]
X3)UsbcIX!*X(] Verbose mode 2 and 3
View all input signal status
EIX3)*USBC}
X(
1
X(
2
X(
3
... X(
n
]
X3)UsbcI*X(
1
X(
2
X(
3
... X(
n
] Verbose mode 2 and 3
View output signal status
EOX3)*X# USBC} X2)]
X3)UsbcOX#*X2)] Verbose mode 2 and 3
View all output signal status
EOX3)*USBC}
X2)
1
X2)
2
X2)
3
... X2)
n
]
X3)UsbcO*X2)
1
X2)
2
X2)
3
... X2)
n
] Verbose mode 2 and 3
Commands Specific to SMX HDMI and DVI Pro Boards
HDCP Status
NOTE: If the source requires HDCP authentication, ensure that HDCP authorization is set to On (the default).
HDCP Authorization On
EEX3)*X!*1HDCP} X3)HdcpEX!*1]
Turn HDCP authorization on for
input
X! (default).
HDCP Authorization Off
EEX3)*X!*0HDCP} X3)HdcpEX!*0]
Turn HDCP authorization on for
input
X!.
Query HDCP encryption
status
EEX3)*X! HDCP} X(]
X3)
HdcpEX!*X(]
View HDCP authorization status for
input
X!.
Verbose mode 2 and 3
NOTES:
X! = Input number 01 - <maximum number of inputs>
X# = Output number 01 - 04
X( = On or off status 0 = Off or disabled
1 = On or enabled
X2) = Output connection status 0 = No active connection on A or B
1 = 1st (A) port is connected but the 2nd (B) port is not connected
2 = 1st (A) port is not connected but the 2nd (B) port is connected
3 = Active connection on both A and B
X3) = Slot number 01 - 10
0 = Hard coded, representing all outputs