User guide

SMX System MultiMatrix Switcher • Operation 30
NOTE: There is only one audio volume setting per output on any specific plane.
The audio volume is shared by the left and right audio outputs. The audio volume
is stored in non-volatile memory. When power is removed and restored, the audio
volume settings are retained.
If the audio is set to “follow-all,” upon initial selection (step 2) the I/O plane and
associated input and output buttons light amber. When an input or output button is
held for 2 seconds (step 3), the I/O plane button flashes red.
Audio Output Volume Adjustment Lighting
Volume
%
dB
Attenuation
Buttons
Lit or
Flashing
SIS command Volume
%
dB
Attenuation
Buttons
Lit or
Flashing
SIS command
100 0 16 plane*out# *64V 52.0 32 8 plane*out# *32V
98.5 1 16 63 50.5 33 8 31
97.0 2 flash slowly 62 49.0 34 flash slowly 30
95.5 3 flash slowly 61 47.5 35 flash slowly 29
94.0 4 15 60 46.0 36 7 28
92.5 5 15 59 44.5 37 7 27
91.0 6 flash slowly 58 43.0 38 flash slowly 26
89.5 7 flash slowly 57 41.5 39 flash slowly 25
88.0 8 14 56 40.0 40 6 24
86.5 9 14 55 38.5 41 6 23
85.0 10 flash slowly 54 37.0 42 flash slowly 22
83.5 11 flash slowly 53 35.5 43 flash slowly 21
82.0 12 13 52 34.0 44 5 20
80.5 13 13 51 32.5 45 5 19
79.0 14 flash slowly 50 31.0
46 flash slowly 18
77.5 15 flash slowly 49 29.5 47 flash slowly 17
76.0 16 12 48 28.0 48 4 16
74.5 17 12 47 26.5 49 4 15
73.0 18 flash slowly 46 25.0 50 flash slowly 14
71.5 19 flash slowly 45 23.5 51 flash slowly 13
70.0 20 11 44 22.0 52 3 12
68.5 21 11 43 20.5 53 3 11
67.0 22 flash slowly 42 19.0 54 flash slowly 10
65.5 23 flash slowly 41 17.5 55 flash slowly 9
64.0 24 10 40 16.0 56 2 8
62.5 25 10 39 14.5 57 2 7
61.0 26 flash slowly 38 13.0 58 flash slowly 6
59.5 27 flash slowly 37 11.5 59 flash slowly 5
58.0 28 9 36 10.0 60 1 4
56.5 29 9 35 8.5 61 1 3
55.0 30 flash slowly 34 7.0 62 flash slowly 2
53.5 31 flash slowly
plane*out# *33V 5.5 63 flash slowly plane*out# *1V
0 76 not lit 0