User guide

SMX System MultiMatrix Switcher • HTML Configuration and Control 97
ATTENTION: Valid firmware files must have the file extension “.S19.” Any other file
extension is not a firmware upgrade and could cause the SMX to cease functioning.
NOTE: The original factory-installed firmware is permanently available on the SMX. If the
attempted firmware upload fails for any reason, the SMX reverts to the factory-installed
firmware.
7. Click Open.
8. On the Firmware Upgrade page, click the Upload button. While the firmware is
uploading, the Upload button changes to Uploading.... When the uploading process
is complete, the button changes back to Upload. The process may take a few minutes.
File Management Page
This page allows you to upload or delete user files (such as HTML pages and graphics) from
the SMX (see Uploading HTML files on page 85 for another method of uploading files).
Figure 57. File Management Page
NOTE: The files listed in the figure above are shown for example only and may not be
present on your SMX.