Setup guide

SMX System MultiMatrix Switchers • Programmer's Guide
4-11
Also refer to the SMX System MultiMatrix Switchers User’s Manual at www.extron.com.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
IP setup commands
Set IP address
E X3$CI
}
Ipi•
X3$]
X3$
= IP address in the format
###.###.###.###. Leading zeros in all the
four fields are optional for setting values.
View IP address
ECI
}
X3$
]
Set subnet mask
E X1(CS
}
Ips•X1(
]
X1( = subnet mask in the format
###.###.###.###. Leading zeros in all four
fields are optional.
View subnet mask
ECS
}
X1(
]
Set gateway IP address
E X3%
CG
}
Ipg•X3%
] X3%
= gateway IP address in the format
###.###.###.###. Leading zeros in all the
four fields are optional.
View gateway IP address
ECG
}
X3%
]
Set E-mail events for recipient
EX4#X4!,X3),X4$,X4%EM
}
X3)
IpeX4#X4!*X4$*X4%
]
View E-mail events for recipient
E X4#X4!,X3),X4$EM
}
X4%X4%X4%
...X4%
]
N
X1( = Subnet mask
X3) = Slot address, 00 (for F and P of X4#), 01 up to 10 (for I of X4#)
X3$ = IP address
X3% = Gateway address
X4# = Notification selection 1: I (inputs), F (fans), P (power supply)
X4! = E-mail account, 65 to 72
X4$ = Notification selection 2: If X4# = I then X4$ = 00 (all inputs) or 1 to 16.
If
X4# = F then X4$ = 00 (both fans), or 01 (fan 1), or 02 (fan 2).
If
X4# = P then X4$ = 00 (both power supplies), or 01 (PS 1), or 02 (PS 2).
X4% = Notify when?: 0 = no response, 1 = fail/missing, 2 = fixed/restored, 3 = both ½, 4 = suspend, 5 =resume