Setup guide

SMX System MultiMatrix Switchers • Programmer's Guide
Programmer's Guide, cont’d 4-10
Also refer to the SMX System MultiMatrix Switchers User’s Manual at www.extron.com.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
EDID (Extended Display Identication Data) commands
Assign EDID data to input
EAX3)*X0!*X3@EDID
}
X3)
EdidAX0!*X3@
]
Assign EDID data to all inputs
EA X3)*X3@*EDID
}
X3)
EdidA
00
*X3@
]
Save output #1 EDID data to
user space
ESX3)*X3@EDID
}
X3)
EdidSX3@
]
Only applies where X3@ = 37 to 40.
View EDID data assigment
EA X3)*X0!EDID
}
X3@
]
X3)
EdidA
X0!
*
X3@ ] Verbose mode.
Export EDID file data
EEX3)*X3@EDID
}
X6)
]
X3)
EdidEX3@*X6)
] Verbose mode.
Import EDID file data to user
file location
EIX3)*X3@EDID
}
X6)
X3)
EdidIX3@
]
Only applies where X3@ = 37 to 40.
PN
For EDID table see page 4-3 in this guide or refer to the online SMX User's Manual.
N
X0!
=
Input number (for tie) 01 – (maximum number of inputs for your model)
X3) = Slot address 01 – 10
X3@ = EDID reference file for DDC data 00 – 40, where 15 = default, 0 = automatic, 1-8 = stored from connected
EDID monitors as reference
, 9-36 = factory fixed rates, 37-40 = user definable
X6) = EDID file data block, 128 bytes of binary data