Setup guide

SMX System MultiMatrix Switchers • Programmer's Guide
4-7
Also refer to the SMX System MultiMatrix Switchers User’s Manual at www.extron.com.
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Plane presets
Save current ties as a plane
preset
X2@*X1!*0, X2@SprX1!
]
Save the current set of ties as plane
preset
X1!. The command character is
a comma (,).
Recall a plane preset
X2@
*
X1!
*0.
X2@
Rpr
X1!]
Recall plane preset X1!, which becomes
the current configuration.
The command character is a period (.).
Virtual (multi plane) denition
Write virtual plane address
EX2(,X2@
1
,X2@
2
,
...
X2@
n
MP
}
MpvX2(,X2@
1
,X2@
2
,...X2@
n
]
Write virtual plane address (90 to 99).
Read virtual plane address
E X2(MP
}
X2@
1
,X2@
2
, ...X2@
n
]
Read virtual plane address.
Front panel lockout (executive mode)
Lock front panel (advanced
functions)
2X/x
Exe2
]
Enable advanced executive mode.
Lock front panel (advanced and
basic functions)
1X/x
Exe1
]
Enable executive mode.
Unlock front panel 0X/x
Exe0
]
Disable executive mode.
View front panel lock status X/x
X(
]
X(
= status of executive mode.
N
For full Lock mode details, refer to chapter 3, "Setting the Front Panel Locks (Executive Modes)" section.
N
X(
= Executive mode: 0 = unlocked (all functions); 1= locked (basic and advanced); 2 = locked (advanced, default value)
X1! = Preset number 01 – 32 (global presets), 1-10 (plane presets)
X2@ = Plane number 00 – 15
X2( = Virtual plane number 90 –99