Setup guide

SMX System MultiMatrix Switchers • Programmer's Guide
Programmer's Guide, cont’d 4-6
Also refer to the SMX System MultiMatrix Switchers User’s Manual at www.extron.com.
N X#
= Output number 01 to maximum number of outputs
X(
= Mute status 0 = off, 1 = on
X1! = Preset number 01 – 32 (global presets), 1-10 (plane presets)
X1$
= Video/audio mute status 0 = no mutes, 1= video mute, 2 = audio, 3 = video and audio mute
X2@
= Plane address 00 to 15 (for 16 planes)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Audio mute
Audio mute
X2@*X#*1Z/z X2@AmtX#*1
]
Mute audio output X#.
Audio unmute
X2@*X#*0Z/z X2@AmtX#*0
]
Unmute audio for X#.
Read audio mute
X2@*X#Z/z X(
]
Read audio output X#.
Audio mute entire plane
X2@*1*Z/z X2@Amt
00*
1
]
Mute audio.
Audio unmute entire plane
X2@*0*Z/z X2@Amt00
*
0
]
Unmute audio.
View mute
View output mutes (per plane)
E X2@VM
}
X1$
1
X1$
2
...X1$
n
]
View output mute for plane X2@.
Mut
X2@•X1$
1
X1$
2
...X1$
n
]
(in verbose mode)
Global presets (all planes)
Save current ties as a global
preset
X1!, SprX1!
]
Save the current set of ties as global
preset
X1!. The command character is
a comma (,).
Example:
9,
Spr09
]
Save current tie set as preset 9.
Recall a global preset
X1!. RprX1!
]
Recall global preset X1!, and becomes
the current configuration. Command
character is a period (.).
Example:
5.
Rpr05
]
Recall preset 5 as current configuration.
N If you attempt to recall a preset that has not been saved, the SMX responds with the E11 error code.