Setup guide

SMX System MultiMatrix Switchers • Programmer's Guide
4-5
Also refer to the SMX System MultiMatrix Switchers User’s Manual at www.extron.com.
N X@ = Input number 01 – (maximum number of inputs for your model), 00 = untied
X# = Output number 01 – (maximum number of outputs for your model)
X( = Mute status 0 = off, 1 = on
X2@ = Plane number 00 – 15
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Quick multiple tie
Make multiple ties
E+QX2@*X@*X# !
...
X2@*X@*X#$
}
Qik
]
Make multiple ties with one command
entry.
Example:
E+Q01*3*4!01*3*5%..
01*3*6$
]
Qik
]
Tie plane 01's input 3 to outputs 4, 5,
and 6.
N
This command activates all I/O switches simultaneously.
View ties
N
If the view follow-all tie command (!) is used for an output with a break-away tie, the switcher responds with an error message, E14.
View video output tie
X2@*X#% X@
]
View video input tied to output X#
on plane
X2@.
X2@OutX#•InX@•Vid
]
(in verbose mode)
View RGBHV output tie
X2@*X#& X@
]
View RGBHV input tied to output X#
on plane
X2@.
View audio output tie
X2@*X#$ X@
]
View audio input tied to output X#
on plane
X2@.
X2@OutX#•InX@•Aud
]
(in verbose mode)
RGB/Video mute
RGB/video mute
X2@*X#*1B/b X2@VmtX#*1
]
Mute RGB/video output X#.
RGB/video unmute
X2@*X#*0B/b X2@VmtX#*0
]
Unmute RGB/video for X#.
Read RGB mute
X2@*X#B/b X(
]
Read RGB/video output X#.
RGB/video mute per plane
X2@*1*B/b X2@Vmt00*1
]
Mute RGB/video plane.
RGB/video unmute per plane
X2@*0*B/b X2@Vmt00*0
]
Unmute RGB/video plane.