Setup guide

SMX System MultiMatrix Switchers • Programmer's Guide
Programmer's Guide, cont’d 4-4
Also refer to the SMX System MultiMatrix Switchers User’s Manual at www.extron.com.
N
X@ = Input number 01 – (maximum number of inputs for your model), 00 = untied
X# = Output number 01 – (maximum number of outputs for your model)
X2@ = Plane number 00 – 15, 90-99 (virtual plane)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Output switching by plane
N
The & tie command for RGBHV and the % tie command for video can be used interchangeably.
The ! tie command can be used for switching both video signals and audio signals with the same plane address.
Tie input to an output (RGBHV)
X2@*X@*X# & X2@OutX#•InX@•RGB
]
Tie input X@ to output X# on plane
X2@ for RGB signals.
Tie input to an output (video)
X2@*X@*X# % X2@OutX#•InX@•Vid
]
Tie input X@ to output X# on plane
X2@ for video signals.
Tie input to an output (audio)
X2@*X@*X# $ X2@OutX#•InX@•Aud
]
Tie input X@ to output X# on plane
X2@ for audio signals.
Tie input to an output (all)
X2@*X@*X# ! X2@Out
X#
•InX@•All
]
Tie input X@ to output X# on plane
X2@ for all signals.
N
Commands can be entered back-to-back in a string with no spaces. For example: 1*1*1&001*002*002&001*003*003&001....
The SMX supports 1-, 2-, and 3-digit numeric entries (1*1*1!, 01*02*02&, or 001*003*003%).
The & tie command for RGB and the % tie command for video can be used interchangeably.
The & read tie command for RGB and the % read tie command for video can be used interchangeably.
Tie input to all (RGBHV)
X2@
*
X@*
&
X2@
In
X@
•RGB
]
Tie input X@ to all outputs on plane
X2@ for RGB signals.
Tie input to all (video)
X2@
*
X@*
%
X2@
In
X@
•Vid
]
Tie input X@ to all outputs on plane
X2@ for video signals.
Tie input to all (audio)
X2@*X@
*
$ X2@InX@•Aud
]
Tie input X@ to all outputs on plane
X2@ for audio signals.
Tie input to all (audio and video)
X2@*X@
*
! X2@InX@•All
]
Tie input X@ to all outputs on plane
X2@, all signals.
SIS Command Tables