Setup guide

SMX System MultiMatrix Switchers • Front Panel Operation
3-3
Also refer to the SMX System MultiMatrix Switchers User’s Manual at www.extron.com.
Viewing Ties
I/O PLANE SELECT
1
2
3
4
5
6 7 8
9
10
11 12 13 14 15
0
Untied buttons light No input buttons light.
INPUTS
1
2
3 4
5
6 7 8
9
10
11 12
13 14 15 16
OUTPUTS
1
2
3 4
5
6 7 8
9
10
11 12 13 14 15 16
C O N T R O L
PRESET ENTER
ESCVIEW
Step 1– Press the View button.
Last plane button used lights.
View button lights red
INPUTS
1
2
3
4
5
6 7 8
9
10
11 12
13 14 15 16
OUTPUTS
1
2
3
4
5
6 7 8
9
10
11 12 13 14 15 16
Step 3 – To view inputs tied to an output, press a tied output button.
I/O PLANE SELECT
1
2
3
4
5
6 7 8
9
10
11 12 13 14 15
0
Step 2 – To view ties for another plane, press that plane button.
Untied output buttons light. Muted outputs blink
INPUTS
1
2
3 4
5
6 7 8
9
10
11 12
13 14 15 16
OUTPUTS
1
2
3 4
5
6 7 8
9
10
11 12 13 14 15 16
Tied outputs and associated input light. Untied output buttons turn off.
Selected plane button lights
ENTER
Step 4 – Press and release Esc.
Esc blinks green once. Button lights turn off. No changes are made to ties.
C O N T R O L
PRESET
ESCVIEW
N If all outputs light, no outputs are tied.
If no outputs light, all outputs are tied.
Maximum number of outputs lit
corresponds to number of outputs
on the I/O board (4, 8, or 16).