User Guide Manual

4-13
MTPX Twisted Pair Matrix Switchers • Programmer’s Guide
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
View ties, gain, volume, mutes, presets, and DIP switch status (continued)
View Input Select DIP
switch positions and level/
peaking status
E
Stat
} X1&
1
X1&
2
...
X1&
n
*
X1*]
Each
X1&
is the switch
position for that rear panel
Input Select DIP switch from
1 to n. n = 3 for matrix sizes
upto1616,n=6formatrix
sizesof1632andlarger.
X1*
indicates whether the input
level/peaking is within the
pre-determined threshold
for the input tied to output 1
only.
Serial port configuration
Read port parameters
E
1CP
} X1(
,
X2)
,
X2!
,
X2@]
Set mode
E
1*
X2#
CY
}
Cpn01•Cty
X2#]
Read mode
E
1CY
} X2#]
N
X1&
= Local input select DIP switch status 0 = RJ-45 position, 1 = local input position
X1*
= Input level/peaking status 0 = not within threshold, 1 = within threshold
X1(
=Baudrate  9600,19200,38400,115200
X2)
= Parity Odd, even, none, mark, space (Only the first letter is required.)
X2!
=Databits  7,8
X2@
= Stop bits 1, 2
X2#
= Port type 0 = RS-232, 1 = RS-422