User Guide Manual

Programmer’s Guide, cont’d
MTPX Twisted Pair Matrix Switchers • Programmer’s Guide
4-12
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
View ties, gain, volume, mutes, presets, and DIP switch status (continued)
View video global preset
configuration
EX1$
*
X@
*1VC
} X!
n
•
X!
n+1
•...•
X!
n+15
•Vid
]
Show preset
X1$
’s video
configuration. Show the
inputtiedto16sequential
outputs, starting from output
X@
.
Command description:
Response description:
preset #*starting output # (StO#)*1(=video)VC
input#(I#)tiedtoStO#•I#tiedtoStO#+1•I#tiedtoStO#+2•...•I#tiedtoStO#+15•Vid
]
N
The starting output number (
X@
) should always be “1” for matrix sizes of 16 outputs or smaller.
N
EX1$
*1*1VC
}
where
X1$
= 0 returns the switcher’s current video configuration.
Example: MTPX 168
E
3*1*1VC
}
1Output:
Response = tied input:
input 12 tied to output 3
2345678
08•08•12•08•08•11•00•00
no tied input
input 8 tied to output 4
•--•--•--•--•--•--•--•--•
13 14 15 1609 10 11 12
outputs do not exist
•Vid
Each position shown in the response is an output: left = starting output (1), right =
startingoutput+15(16).(Outputs9through16arenotpresentontheMTPX168.)The
number in each position is the input tied to that output.
Inthisexample,preset3,videoinput8istiedtooutputs1,2,4,and5;input12istiedto
output3;andinput11istiedtooutput6.Noinputsaretiedtooutputs7and8.
View audio global preset
configuration
EX1$
*
X@
*2VC
} X!
n
•
X!
n+1
•...•
X!
n+15
•Aud
]
Show preset
X1$
’s audio
configuration. Show the
inputtiedto16sequential
outputs, starting from output
X!
.
Command description:
Response description:
preset #*starting output # (StO#)*2(=audio)VC
input#(I#)tiedtoStO#•I#tiedtoStO#+1•I#tiedtoStO#+2•...•I#tiedtoStO#15•Aud
]
N
The starting output number (
X@
) should always be “1” for matrix sizes of 16 outputs or smaller.
N
EX1$
*1*2VC
}
where
X1$
= 0 returns the switcher’s current audio configuration.
Example: (MTPX 1632)
E
15*17*2VC
}
17Output:
Response = tied input:
i
nput 1 t
i
e
d
to output 3
18 19 20 21 22 23 24
01•01•01•01•02•12•12•00•00•00•00•00•01•08•15•16•Aud
25 26 27 28 29 30 31 32
no t
i
e
d
i
nput
Eachpositionshownintheresponseisanoutput:left=startingoutput(17),right=
startingoutput+15(32).Thenumberineachpositionistheinputtiedtothatoutput.
Inthisexample,preset15,audioinput1istiedtooutputs17,18,19,20,and29;input2is
tiedtooutput21;input12istiedtooutputs22and23;input8istiedtooutput30;input
15istiedtooutput31;andinput16istiedtooutput32.Noinputistiedtooutput24,25,
26,27,and28.
N
X!
= Input number 00–(maximumnumberofinputsforyourmodel)
X@
= Output number 00–(maximumnumberofinputsforyourmodel)
X1$
= Global preset # 0 - 32, 10 maximum (0 = current configuration)