User Guide Manual

3-11
MTPX Twisted Pair Matrix Switchers • Operation
PRELIMINARY
Example 1: Creating a set of video and audio ties
Thefollowingexampletiesinput5tooutputs3,4,and8.Thestepsshowthefront
panel indications that result from your actions.
N
This example assumes that there are no ties in the current configuration.
1. Press and release the Esc button (figure 3-4).
ENTER PRESET VIEW ESC
CONTROL
Press the Esc button to clear all selections.
The LED
blinks once.
Figure 3-4 — Clear all selections
2. To select video and audio for the tie, if necessary, press and release the Video
button and the Audio button until both the Video and Audio LEDs light
(figure 3-5).
VIDEO AUDIO
I/O
Press the Video button to
toggle on and off.
The LED lights when
selected.
Press the Audio button
to toggle on and off.
The LED lights when
selected.
Figure 3-5 — Select video and audio
3. PressandreleasetheInput5button(gure3-6).
3 4 5 6
INPUTS
7
Press and release
the Input 5 button.
The LED lights.
Figure 3-6 — Select an input