User Guide Manual

Reference Information, cont’d

MTPX Twisted Pair Matrix Switchers • Reference Information

A-8

PRELIMINARY

Button Labels

FigureA-1providesblankbuttonlabelsfor16-buttonswitchers.FigureA-2on

page A-11 provide blanks for 32-button switchers. Feel free to photocopy them

or cut them out of the manual, write button information in each button area as

desired, and put them in the switcher’s label window.

To remove a panel, insert the Phillips-head end of a Tweeker or small Phillips-head

screwdriver into the hole in one end of the panel, and gently slide the tab at the

edge of the panel out of the recess in the switcher housing.

Printing Instructions

If you print these strips to cut out and use in your switcher:

 • Printon8-1/2”by11”(letter)paper,inportraitorientation.

 • SetpagescalingtoNone.

 • Afterprinting,verifythattheprintedstripstbehindthepanel.Your

printer conﬁguration may cause the strip to be printed smaller or larger than

speciﬁed.