User Guide Manual

A-3
MTPX Twisted Pair Matrix Switchers • Reference Information
PRELIMINARY
Video output — main (see receivers’ input specifications)
Number/signal type ..................... 8,16,or32proprietaryanalogsignals
Connectors ..................................... 8,16,or32(dependingonconguration)femaleRJ-45connectors
Sync — local inputs and outputs only
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................... See receiver specifications (see specifications on Web site).
Input level ...................................... 3.5Vto5.5Vp-p,unterminated;4.0Vp-pnormal
Output level ................................... See receiver specifications (see specifications on Web site).
Input impedance ........................... 573ohms±5%
Output impedance ........................ 110 ohms
Max. input voltage ........................ 5.0 Vp-p
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative
Audio
Routing
MTPX816 ........................... 8x16monomatrix,3x4local
MTPX168 ........................... 16x8monomatrix,3x4local
MTPX1616 ......................... 16x16monomatrix,3x4local
MTPX1632 ......................... 16x32monomatrix,6x8local
MTPX3216 ......................... 32x16monomatrix,6x8local
MTPX 3232 ......................... 32x32monomatrix,6x8local
Gain (local inputs and outputs) .. Unbalancedoutput:0dB;balancedoutput:+6dB
Frequency response ...................... 20 Hz to 20 kHz, ±1 dB
THD+Noise .................................. 0.15%@1kHzatnominallevel
S/N .................................................. >70dBatmaximumoutput(unweighted)
CMRR .............................................. >43dB@20Hzto20kHz
Audio input — local
Number/signal type ..................... 3or6stereo,balanced/unbalanced
Connectors ..................................... (3)or(6)3.5mmcaptivescrewconnectors,5pole
Impedance ...................................... >10k ohms unbalanced
Nominal level ................................ +4dBu(1.23Vrms),-10dBV(316mVrms)
Maximum level .............................. +18dBu,balancedorunbalancedat1%THD+N
N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio input — main (see transmitters’ output specifications)
Number/signal type ..................... 8,16,or32proprietaryanalogsignals
Connectors ..................................... 8,16,or32(dependingonconguration)femaleRJ-45connectors
Audio output — local
Number/signal type ..................... 4or8dualmono,balanced/unbalanced
Connectors ..................................... (4)or(8)3.5mmcaptivescrewconnectors,5pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±1 dB channel to channel
Maximum level (Hi-Z) ................. +18dBu,balancedorunbalancedat1%THD+N
Maximumlevel(600ohm) ........... +15dBm,balancedorunbalancedat1%THD+N