User Guide Manual

5-13
MTPX Twisted Pair Matrix Switchers • Matrix Software
PRELIMINARY
Ties as crosspoints — Displays ties as a matrix of inputs and outputs (figure 5-13).
Ties that have been made are indicated as amber (video and audio), green
(video only), and red (audio only) boxes. Ties that will take effect when you
click the Takebuttonareindicatedby+.Tiesthatwillbebrokenwhenyou
click the Takebuttonareindicatedby–.
Figure 5-13 — Ties shown as crosspoints
Icons in I/O boxes — Erases any numbers in the I/O boxes in the
Control Program window (figure 5-5). You can place icons in the
boxes.
Numbers in I/O boxes — Erases any icons in the I/O boxes in the
Control Program window and fills each box with the associated
input or output number.
Catch FPC/others changes — When checked, sets the switcher to report all
configuration and setting changes to the serial port that turned this selection
on. These reports allow the Matrix Switchers Control Program to track the
changes that occur in the switcher’s configuration and settings, whether
commanded via the front panel or either serial port.
Master-Reset selection
Master reset clears all ties and presets, all audio mutes, sets all input audio
levelstounitygain(+0dB),andsetsalloutputvolumelevelsto100%(0dBof
attenuation).