User Guide Manual

Matrix Software, cont’d
MTPX Twisted Pair Matrix Switchers • Matrix Software
5-6
PRELIMINARY
Updating firmware
The firmware upgrade utility provides a way to replace the firmware that is coded
on the switcher’s control board without taking the switcher out of service.
Update the switcher firmware as follows:
1
. Visit the Extron Web site, www.extron.com, click the Download tab, and then
click the Firmware
link(gure5-6).
3
2
3
1
1
Figure 5-6 — Location of firmware upgrade files
2. Select the appropriate firmware file (MTPX Firmware) to download and click
Download.
3
. Enter the requested personal information and then click Download to copy the
firmware to your computer.
4
. Click Runtwice(gure5-7onthenextpage).ThePCdownloadsthe
firmware update from the Extron Web site and starts the Extron Installation
Program to extract the firmware file.
5
. Click Next. The program extracts the firmware files and places them in a
folder identified in the InstallShield Wizard window.
N
Note the folder to which the firmware file is saved.
6. Click Finish to exit the program.