User`s manual

Installation, cont’d
MTP T 15HD A Architectural Plates • Installation
7
Installing the MTP T 15HD A AAP
The MTP T 15HD A AAP must be attached to a device faceplate
or AAP wall plate and cabled before the device or wall plate is
pretested or installed in a wall or furniture.
1. Before attaching any cables, insert the MTP T 15HD A AAP’s
standoffs through the holes in the device’s faceplate or AAP
wall plate.
2. Using the #4-40 nuts and captive washers provided, secure
the line driver to the faceplate or wall plate.
3. Repeat steps 1 and 2 to mount any other AAPs. Cover any
openings in the faceplate with blank plates (provided with
the AAP faceplate).
4. Be sure to include the AAP connectors as part of the
installation pretest before final installation of the faceplate.
5. For more detailed installation information, refer to the
installation guide shipped with the device or AAP faceplate.
MTP T 15HD A AAP
AAP 102
AAP 102
AUDIO IN
MTP
T 15HD
A
COM
PUTER
IN
PC INPUT
AUDIO
Wall opening
is flush with
edge of box.
Wall Box
Decora
Faceplate
MTP T 15HD A D
Figure 5 — Mounting the MTP T 15HD A D
Figure 6 — Mounting the MTP T 15HD A AAP