User`s manual

MTP DA4 and MTP DA8 • Reference Information
Reference Information
MTP DA4 and MTP DA8 • Reference Information
16
17
Specifications
Video
Gain ................................................. Unity
Video input— see transmitters’ specifications
Number/signal type ..................... 1 set of proprietary analog signals
Connectors ..................................... 1 female RJ-45
Video output— see receivers’ specifications
Number/signal type
MTP DA4
............................ 4 sets of proprietary analog signals
MTP DA8 ............................ 8 sets of proprietary analog signals
Connectors
MTP DA4
............................ 4 female RJ-45
MTP DA8 ............................ 8 female RJ-45
Maximum resolution .................... 1920x1200
N
Refer to the user’s manual for the maximum distances recommended for
specific resolutions.
Audio
Gain ................................................. Unity (0 dB)
Audio input— see transmitters’ specifications
Number/signal type ..................... 1 set of proprietary analog signals
Connectors ..................................... 1 female RJ-45
Audio output— see receivers’ specifications
Number/signal type
MTP DA4
............................ 4 sets of proprietary analog signals
MTP DA8 ............................ 8 sets of proprietary analog signals
Connectors
MTP DA4
............................ 4 female RJ-45
MTP DA8 ............................ 8 female RJ-45
Control/remote— distribution amplifier
Contact closure (latching)
MTP DA4
............................ (1) 3.5 mm captive screw connector, 6 pole
for contact closure output mute control
MTP DA8
............................ (1) 3.5 mm captive screw connector, 10
pole for contact closure output mute
control
Contact closure pin congurations
MTP DA4
............................ 1 = mute output 1, 2 = mute output 2,
3 = mute output 3, 4 = mute output 4,
5 = mute all outputs, 6 = GND
MTP DA8
............................ 1 = mute output 1, 2 = mute output 2,
3 = mute output 3, 4 = mute output 4,
5 = mute output 5, 6 = mute output 6,
7 = mute output 7, 8 = mute output 8,
9 = mute all outputs, 10 = GND
General
Recommended cable type ............ Enhanced Skew-Free
™
A/V UTP Cable or
CAT 5/5E/6 (shielded or unshielded)
External power supply
................. 100 VAC to 240 VAC, 50/60 Hz, external
MTP DA4 ............................ 12 VDC, 2 A, regulated
MTP DA8 ............................ 12 VDC, 3 A, regulated
Power input requirements ........... 12 VDC, 0.93 A
Temperature/humidity ................ Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling
........................................... Convection, no vents
Mounting
Rack mount
........................ Yes, with optional 1U, 9.5" deep rack shelf,
part #60-190-01 (RSU 129) or 60-604-01
(RSB 129) or 1U, 6"deep rack shelf,
part #60-190-10 (RSU 126) or 60-604-10
(RSB 126).
Furniture mount
................ Yes, with optional Under-Desk Mounting
Kit #70-077-01 (MBU 125)
Pole mount ......................... Yes, with optional Projector Mounting Kit
#70-077-04 (PMK 200)
Enclosure type
............................... Metal
Enclosure dimensions ................... 1.75" H x 8.75" W x 6" D
(1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)