User guide

CONNECTORS & CONTROLS
MSV0502 / MSV0804 / MSC0603 Matrix Switchers
CTL120-2 REMOTE CONTROL
1st BUTTON TO PRESS
CH VOL
ENTERMENU
BLANK MUTE
FREEZE
INPUT RECALL
ENTER
ENTPIP
AUDIO
POWER
123
45
897
0
6
S
MATRIXSWITCHER
VIDEO
SCALER
+
–
+
–
MENU OK
MATRIX
CTL120-2 COMMAND EXAMPLES FOR MSV0502/MSV0804/MSC0603 MATRIX SWITCHERS
COMMAND EXAMPLES
function: Configure an input/output patch.
steps: Press the numeric button that corresponds to the desired
output select button.
Press the numeric button that corresponds to the desired
input select button.
function: Increase the audio level.
steps: Press the VOL
+
button once to increase the volume slightly.
Press and hold VOL
+
to continuously increase the volume.
function: Mute the audio signal.
steps: Press the MUTE button to engage mute.
Press MUTE again to return to previous volume.
Numeric Buttons
Select desired output,
followed by the desired input
Enter Button
Press to make a menu selection or to
execute a new setting when using
on-screen menus
Vol
+
Button
Increases audio level
Vol
–
Button
Decreases audio level
Controls
all outputs
simultaneously
Mute Button
Mutes audio signals
Matrix Button
Press this button first to set
the CTL120 to control
MSV0502 / MSV0804
matrix switchers
IMPORTANT: You must press the MATRIX button ( ) once to set the CTL120 remote to control
MSV0502/MSV0804/MSC0603 matrix switchers.
MATRIX