User guide

ES9600 User Guide Chapter 8: Remote control Protocols
95 Version 1.13
Miscellaneous Commands – (Telnet Protocol)
tbd
GetTemperature <sensor1> … <sensorN>
This command returns the temperature reading of the requested sensors. If sensor names are omitted, the
command returns the readings of all available sensors.
Parameters:
<sensor>
The name of a sensor to retrieve.
values := “front panel” | “main processor”
Sensor values are listed in the following table.
“front panel”
Temperature sensor on the front panel board.
“main processor”
Temperature sensor near the main CPU.
Player Response:
Temperature <sensor> <temperature value>
Examples:
GetTemperature
Temperature “front panel” 36.50C
Temperature “main processor” 42.75C
Temperature
GetVoltage <sensor1> … <sensorN>
This command returns the temperature reading of the requested sensors. If sensor names are omitted, the
command returns the readings of all available sensors.
Parameters:
<sensor>
The name of a sensor to retrieve.
values := “front panel” | “main processor”
“PS1 5vdc”
5V rail on power supply 1
“PS2 5vdc”
5V rail on power supply 2
“PS1 3.3vdc”
3.3V rail on power supply 1
“PS2 3.3vdc”
3.3V rail on power supply 2
“PS1 12vdc”
12V rail on power supply 1
“PS2 12vdc”
12V rail on power supply 2
“PS1 -12vdc”
12V rail on power supply 1
“PS2 -12vdc”
-12V rail on power supply 2
Player Response:
Voltage <sensor> <voltage>