User guide

ES9600 User Guide Chapter 8: Remote control Protocols
89 Version 1.13
Timecode Commands
GetTimecodeMode
This command returns the timecode mode setting.
Player Response:
TcGenerate or TcReceive
GetTimecodeOpMode
This command returns the timecode ‘receive’ mode settings.
Player Response:
Chase or Trigger
GetTimecodeValue
This command returns the timecode value (hh:mm:ss:ff) at the instant in time that the command was entered.
SetTimecodeOpMode <mode>
Sets the player into one of two timecode modes.
Mode parameters: ‘Chase’ or Trigger’
Player Response:
OK or ERROR
Tcgenerate <channel list> <timecode>
Turns the timecode generator on and sends the timecode hh:mm:ss:ff out as a jam sync.
Player Response:
OK or ERROR
Tcplayat <channel list> <timecode>
Sets the timecode playat time
Player Response:
OK or ERROR
Tcreceive <channel list>
Sets the player into timecode receive mode.
Player Response:
OK or ERROR