User guide

ES9600 User Guide Chapter 8: Remote control Protocols
74 Version 1.13
Player Response:
OK or ERROR
SetHdsdiMode <mode>
This command sets the HD-SDI mode of the player output. The HD-SDI mode is only active in single channel
mode.
Parameters:
Mode Description
single
SMPTE 292M – Single Link Mode
Only the first HD-SDI output is used.
All video formats are converted to 4:2:2 10-bit.
dual_422_12
SMPTE 372M – Dual Link
All video formats are converted to 4:2:2 12-bit.
dual_444_10
SMPTE 372M – Dual Link
All video formats are converted to 4:4:4 10-bit.
dual_444_12
SMPTE 372M – Dual Link
All video formats are converted to 4:4:4 12-bit.
Player Response:
OK or ERROR
SetVideoMode <mode_string>
This command sets the output mode of the player..Available mode strings for the MS9600 are listed in the
following table.
Mode String Description
“1_channel”
Single video output channel available.
“2_channel”
Two video output channels available.
Channel playback can be controlled independently.
“2_channel_locked”
Two video output channels available.
Channel playback affects both channels simultaneously.
Player Response:
OK or ERROR
VideoOff <channel list>
Disable video on the specified channels.
Player Response:
OK | ERROR
VideoOn <channel list>