User guide

ES9600 User Guide Chapter 8: Remote control Protocols
73 Version 1.13
“video.hdsdi”
The player HD-SDI outputs.
This affects both channel 1 and channel 2.
“ch1.video.dac”
Analog output of channel 1.
“ch1.video.dvi”
Digital output of channel 1.
“ch2.video.dac”
Analog output of channel 2.
“ch2.video.dvi”
Digital output of channel 2.
The names of the available colorspaces are shown in the following table.
Colorspace Description
“RGB”
tbd
“CIE 1931 XYZ”
“YCrCb BT.601”
“YPrPb BT.709”
Player Response:
OK or ERROR
Examples:
SetColorspace “video.hdsdi” “CIE 1931 XYZ”
OK
SetColorspace “ch2.video.dac” “YPrPb BT.709”
OK
SetGenlockMode <mode>
This command sets the Genlock mode of the player.
Parameters:
Mode Description
Blackburst
N/A- Receive external Video Black & Burst signal (Slave)
esgen
Receive control signal from another ES product (Slave)
esgen_legacy
Receive control signal from another ES product (Slave)
master
Send ESGen control signal to other ES products
Player Response:
OK or ERROR
SetHdsdiEnable <enable>
This command enables or disables the HD-SDI output of the player.
Parameters:
<enable> true or false.
Enable or disable the HD-SDI output.