User guide

ES9600 User Guide Chapter 8: Remote control Protocols
72 Version 1.13
SetAudioMaster <parameter)
This command sets the audio mute for the unit.
Parameters:
AudioOn
…
AudioMute
SetAudioMute <channel list> <mute>
This command sets audio mute on the specified channel.
Parameters:
<channel list>
The list of channels to be modified.
<mute>
Set to “1” to mute the channel.
Set to “0” to unmute the channel.
Player Response:
OK or ERROR
SetAudioVolume <channel list> <left_attenuation> <right_attenuation>
This command sets the audio output attenuation level for the specified channels. The attenuation level is measured
in decibels ranging from the value 0 (no attenuation) to -144 (full attenuation).
Parameters:
<channel list>
The list of channels to be modified.
<left_attenuation>
The attenuation level for the left channel in decibels.
<right_attenuation>
The attenuation level for the right channel in decibels.
Note: The left and right channel attenuation levels must be the same.
Player Response:
OK or ERROR
SetColorspace <video output> <colorspace>
This command changes the colorspace of the specified player output.
Parameters:
<video output> The player output to modify.
<colorspace> The name of the new colorspace.
The names of the video outputs are shown in the following table.
Video Output Description