User guide

ES9600 User Guide Chapter 8: Remote control Protocols
67 Version 1.13
Command Reference
Each section below describes related commands.
In the examples which follow, any text in fixedfont-bold-italics should be entered by the user (not all
of the reference commands will give examples).
Text which is in fixedfont is returned by the player.
Configuration Commands
Colorwash <Channel> <Red> <Green> <Blue> <Alpha> <Time>
This command sets the ‘alpha blend’ between output video and black (or any color) resulting in a ‘fade-to- black’
option the end of a clip.
Parameters:
<channel list>
The list of channels to be modified: 1 or 2.
<Red>
Enter value 0-255. 0 = no Red; 255 = maximum Red
<Green>
Enter value 0-255. 0 = no Green; 255 = maximum Green
<Blue>
Enter value 0-255. 0 = no Blue; 255 = maximum Blue
<Alpha>
Enter value 0-255. 0 = no Video; 255 = maximum
Colorwash/Black
<Time>
Time (in seconds; e.g.: 0.00sec) for transition between full
video and colorwash
Note: Use a Fade in/Fade out time value below 4.0 seconds for best results.
Player Response:
OK or ERROR
GetAudioDelay <channel list>
This command returns the delay, in milliseconds, between audio and video for the requested channels.
Player Response:
AudioDelay <channel> <delay_ms>
…
AudioDelay
GetAudioMaster
This command returns the audio mute setting for the unit.
Player Response:
AudioOn
…
AudioMute