User guide

ES9600 User Guide Chapter 3: Player Interface – LCD
25 Version 1.13
Network Interface 1, 2
 IP – Adjust the IP as required
 Netmask – Adjust the Netmask as required by the network administrator – this is usually done at the time
of installation in a network and will not be changed.
 Enable DHCP – Select this feature to toggle DHCP on or off.
Press <ENTER> to Disable DHCP for access to the IP Settings.
NOTE: If DHCP is checked the IP and Netmask settings are determined automatically by the network.
Use <ENC> to highlight/select an item in the IP Settings display and Press <Apply>.
NOTE: This would be a good time to record the ES9600’s IP address and name (Refer to section ‘System:
Computer Name’ later in this Chapter) as this information will be required for transferring JP2K files to the
ES9600 with an FTP application (refer to following chapter).
Gateway
Use <ENC> to adjust the setting as needed and Press <Apply>:
 Interface 1/Interface 2 – Choose Interface 1 or 2
 Gateway – Adjust the Gateway as required