User guide

ES9600 User Guide Chapter 3: Player Interface – LCD
18 Version 1.13
Chapter 3: Player Interface – Front Panel/LCD
The 9600 player is very easy to use and most of its functionality can be accessed through the front-panel interface,
which is described in this chapter. Refer to the previous chapter for more information on the individual front-panel
control buttons. Certain ‘advanced’ features can only be accessed through the on-line user interface, which is
described in the next chapter (Player Interface – Web).
Having correctly installed your ES9600 into the AV system, follow the steps below to access the font panel
controls:
1. Turn ‘ON’ the two mains-power OFF/ON switches at the rear of the player. The white LED backlit
buttons on the front panel will flash on/off about 8 times followed by an Electrosonic “splash-screen” still
image on the video display.
NOTE: Should the buttons not illuminate, verify that the power supplies are securely connected then
toggle the power switch between OFF/ON.
The “splash-screen” (shown in the image below) will appear for a few moments to be replaced by the
default (Main Menu) display.
2. The Main Menu display:
The unit is ready for operation/configuration.
3. Use the front panel encoder knob <ENC> to navigate the interface and highlight (select) the various
Icons.
NOTE: Throughout this User Guide ‘<ENC>’ indicates that the user is to rotate the Encoder knob to
make a selection from a number of options.