User guide

ES9600 User Guide Chapter 2: Quick Start
15 Version 1.13
Chapter 2: Quick Start
Use the information in this chapter to familiarize yourself with the control buttons on the unit and play the test clip
included as part of your ‘quick-start’ system verification.
Front Panel Features
All local user-manageable functions of the Player are accessible from the front panel. Refer to Chapter 8: Remote
Control Protocols for information on using the ES9600 in a networked system. The following diagram illustrates
the ES9600 front panel layout:
The front panel is equipped with a number of user interface and monitoring features.
STATUS LEDs
Indicate (left to right in diagram):
 VIDEO active
 Hard Disk 1 active
 Hard Disk 2 active
 Hard Disk 3 active (Future)
 Hard Disk 4 active (Future)
 Ethernet 1 active
 Ethernet 2 active
CONTROL KEYPAD (TRANSPORT) BUTTONS

Last Clip – Press this button to load the previous Clip in a Playlist. Does not function if no Playlist
is loaded.
 Frame Mode – Press this button, then and rotate <ENC> to step frame by frame, forward or
reverse, through the clip while clip is in Play mode

Shuttle Mode – Press this button, then rotate <ENC> to ‘shuttle’ forward or backwards through
the clip at a preset rate controlled by <ENC>