User guide

ES9600 User Guide Chapter 1: Introduction/Quick Reference Guide
13 Version 1.13
In addition, the ferrite cores supplied with the player must be attached to any serial communication cable or GPIO
cable connected to the player. The ferrite core should simply be closed around the cable (close to the connector at
the player) and snapped shut.
Video/Audio Interface
From left:
 AUDIO – AES/EBU Digital Audio Output. Channels 1-16 (2 channels per BNC connector)
 HD/DVI-1 – High Definition Video output (Digital and Component Video). Connection for a High
Definition Video display device
 HDSDI-1 – HD-SDI Video Output 1 (BNC)
 HDSDI-2 – HD-SDI Video Output 2 (BNC)
 HD/DVI-2 – High Definition Video output (Digital and Component Video). Connection for a High
Definition Video display device
 GENLOCK INPUT – (FUTURE) BNC socket. Connect external Genlock Black and Burst signal
generator for multiple player synchronization
 ESGEN – In/Out Link for Genlock connection with other ES devices (Din connectors)
 LTC IN/OUT – 2 Phono sockets. Connect Linear Time Code (LTC) for system control (Refer to Chapter
4: Linear Timecode LTC)
Communications/Control Interface
The communication and control interface is as follows:
 DUAL GIGABIT ETHERNET – Access the LAN for TCP/IP control capability and data transfer (Dual
RJ45)
 RS232 – Control port (comm.) I/O port for local computer control (D9 x 2)
 GPIO INTERFACE – Optional control ports for external devices (Refer to Chapter 13)