User guide

ES9600 User Guide Chapter 1: Introduction/Quick Reference Guide
9 Version 1.13
 1TByte of internal media storage
 16 channels of uncompressed digital audio; AES/EBU 24bit @ 48/96KHz (NOTE: 16 channel audio is
supported with 4:4:4 video format only. 4:2:2 video formats support 8 audio channel only. See below)
 Linear Time Code (LTC) features for strict system timing control
 ESGEN genlock capable for multi-unit synchronous operation
 4 Opto-isolated inputs and 4 changeover relay contact outputs for enhanced show control
 Monte Vista Linux embedded OS
 Support for ESCAN remote control (system control software by Electrosonic)
Video Outputs
 Supported video output resolutions: 2048x1080p (2K), 1920x1080p and 1280x720p
¾ 2048 x 1080 @24fps 4:4:4 (16 channel audio)
¾ 1920 x 1080p @24fps 4:4:4 (16 channel audio)
¾ 1920 x 1080p @25fps 4:4:4 (16 channel audio)
¾ 1920 x 1080p @30fps 4:4:4 (16 channel audio)
¾ 1920 x 1080 @29.97fps 4:2:2 (8 channel audio)
¾ 1280 x 720p @50fps 4:4:4 (16 channel audio)
¾ 1280 x 720p @60fps 4:2:2 (8 channel audio)
 Two DVI/I outputs RGB/YPrPb SMPTE274/296M
 Dual Link HDSDI SMPTE 374M or two single link HDSDI SMPTE292M
 Support for 12/10 bit 4:4:4 XYZ/RGB/YCrCb and 12bit 4:2:2 YCrCb
NOTE: The unit can be set to function either as a dedicated HDSDI device or a dedicated DVI/I device.
Please refer to the relevant sections throughout this guide for ‘how to’ information on configuring the video
outputs.
2-Channel
Output two discrete video signals to different display devices.
2-Channel -Locked
Output two perfectly synchronized video signals to a device that is capable of receiving such an input. This is
ideal for 3D projection situations.
1-Channel
Output a single analog or digital signal to a display device connected to HDSDI-1 or DVI-1.
NOTE: With HDSDI 4:4:4 both video outputs (HDSDI-1 and HDSDI-2) are connected to the display device.